ClipLight Flex Inject

Super Seal Flex Inject

Clipligh_Flex_Inject

Super Seal Flex Inject™

Clipligh_Flex_Inject 2New Super Seal Flex Inject™ triple power sealant is the fastest, permanently seal and prevent air conditioning and refrigeration (AC/R) leaks. Flex Inject installs in seconds - no tools or gauges required.

Simply connect the Flex Inject hose to the high and low side service ports, remove the foam pre-release safety feature, press the push button, the sealant into the system without causing liquid slugging. The Flex Inject sealant goes to work immediately traveling through the system with both the oil and refrigerant stopping leaks dead in their tracks. No recovery, no pump down, and no run time required. Just connect and go.

Benefits:
No Tools Required
- Flex Inject is fast and easy to use and requires no tools. It immediately repairs and seals system micro leaks. Flex Inject uses a flexible clear hose with a push button valve and patented misting orifice that sends the sealant into the system traveling with the oil and refrigerant. It fixes leaks without the need for manifold gauges, service valves, caulking guns or refrigerant hoses. Just connect and go!

3X Sealing Power - Flex Inject sealant is three times more powerful than other tube injection systems. The sealant reacts with micro droplets of water at the exterior of the leak creating a protective barrier to keep refrigerant from escaping. Unless the system is opened, the sealant continues to work preventing future leaks.

Polymer Free - Flex Inject is polymer-free and works with all compressors, heat pumps, condensers, recovery units, and other system components. It will not plug up manifold gauges, metering devices, thermostatic expansion valves (TXVs), pistons or cause cap tube blockages. Flex Inject is suitable for use in aluminum and copper coils and is microchannel friendly.

Compatible with all oils and refrigerants
- The Flex Inject formula uses organosilanes, a low viscosity particle free liquid. As it travels throughout the system with the oil and refrigerant, the sealant exits at the leak point and reacts with the moisture in the outside atmosphere. This forms a low tensile crystalline structure and creates a permanent non-polymer based seal. It can be installed in a fully charged system with no recovery or pump down and works with all refrigerants including R-134A, R-404A, R-407C, and R-410A.

For more product information, please click here.